Why you need a Stone Water curtain air dust collector cleaner
Dust and powder pollution seriously restrict the development of stone industry. The processing technology of stone material includes cutting, grinding and polishing, profiling processing, inspection and repair, etc. Many stone factories have found that the dust concentration is seriously higher international standard, the silica free is between 2.62% and 42.12%, and the dust concentration of all posts is higher than international standard. The main reason for such serious dust exceeding is that stone enterprises did not have a good treatment on stone dust, and many workers in small enterprises just wore dust mask. However, some large enterprises only discharge dust in the air through simple negative pressure fans equipment. Due to technology limited, many dust still cannot be good treatment, so the whole workshop looks gray. And the dust is not purified and directly discharged into the air, which has a great impact on the environment. Dust is a serious threat to people’s health, occupational diseases are increasing, environmental pressure is also increasing. Therefore, many stone enterprises only care about immediate interests, and it is not advisable to sacrifice interests brought by environment. Therefore, it is urgent to choose a efficient dust collector cleaner for stone industry.
Descriptions of stone Water curtain air dust collector cleaner
At present, high efficiency stone Water curtain air dust collector cleaner can be used on stone industry, which is suitable for purifying non-corrosive dust gas with temperature no more than 300 ℃, especially for dust gas with high dust concentration and high humidity. It can also achieve good results for the purification of sticky dust and non hydrophilic dust.
Working Principle of stone Water curtain air dust collector cleaner
The main principle of stone Water curtain air dust collector cleaner is to use centrifugal force to thoroughly mix water and dust containing gas, and then remove clean air. Water curtain will be generated when the dusty air flow passes through a static impeller sheet partially submerged in water, and the dust will be removed when passing through the water curtain. At the bottom of the blade, there is a specially designed groove mouth to supplement the extra water to the narrowest part of the impeller opening. The water flowing upward through the groove mouth increases the interaction between dust and water, thus improving the dust collection efficiency. The centrifugal force generated by the rapid change of air flow direction makes the dust be captured permanently when passing through the water curtain. The moisture carried in the clean air is removed by a specially designed demisting baffle. The water in the water tank is repeatedly used. After the water curtain generated by the air flow is formed, the water pump or nozzle is no longer needed. A small amount of clear water is always added to the make-up joint to compensate for the water taken away due to evaporation or sludge removal.
Features of Stone Water curtain Air Dust Collector cleaner
After using the Stone Water curtain Air Dust Collector cleaner, it did not change the operation habits of workers, but improved the working environment of employees and controlled the hazards of occupational diseases from the source; the purification rate reached 95.7%, which exceeded the international environmental protection standards. The workers start synchronously when they are working; after they stop working, the equipment has the function of delay and automatic stop. The equipment is equipped with automatic flushing, automatic blow down device and maintenance device, which greatly reduces the use cost of customers and creates greater economic benefits for customers.